Insulation Testing vs Portable Appliance Testing..



Kyoritsu_3132A a popular Insulation Tester used in Test & Tag

The Australian Standard AS/NZS3760:2003 outlines the parameters by which an appliance can be tested, it does not give an accurate description of the test equipment required. For most part it descibes how to test using Insulation testers. This type of test equipment gives a readout in electrical units (Ohms, Volts etc) and requires good electrical knowledge usually acquired by being a licensed electrician.

These Insulation testers are someways adequate, in that they cannot give a definitive Pass/Fail answer. There is a group of Third Generation of Test Equipment available at the moment that can provide a Pass/Fail definitive answer if setup properly by a ‘Competent Person’.. As you may recall from our previous Blog entry a Competent Person is a person who knows how to use test equipment safely and effectively, must have an understanding of the construction of the equipment, the requirements of the standard, the dangers of electricity and the legislative requirement. The best way to ensure that a person is competent and current is to ask if they have a certificate for completion of an Electrical Appliance Testing Course. An Electrician can use an Insulation tester or a PAT tester, however a ‘Competent Person’ with no Electrical trade can only use a PAT Tester.
Generally Electricians use Insulation testers. They already need to use them for testing the integrity of the internal wiring of a premises or factory. In many ways current technology has made Insulation Testers somewhat redundant for Portable Appliance Testing…
Here at Tested & True ~ test & tag we use the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one operation.On top this all our Technicians are Trained to National Standard UEENEEP008 by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian and NZ Standards ensuring that you get Quality Service at a competitive price.

Visit us at

or our Newsletter

Peter Hill Manager, Tested & True ~ test & tag Adelaide July 2010

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s