Working Near Power Lines

Working near Power lines here in South Australia

Performing work in close proximity to overhead power-lines or underground power cables can be a hazardous operation. Fatalities and injuries occur every year as a result of unsafe work practices when working near overhead power-lines. All machinery operators and other workers conducting work near overhead power-lines should also be aware of their safety obligations and adopt safe work practices

Practice safe work habits

Before work commences a Hazard Assessment must take place. It is an important task to Identify all electrical hazards, assess the risks, establish control measures and review these periodically. Control measures may include, but may not be restricted to:

  • applying appropriate signage at least 8 to 10 metres either  side of power-lines and using visual indicators such as tiger tails fitted to the power-lines
  • Using ground barriers, where appropriate
  • Informing workers of required work practices.
  • Ensure operators are aware of the height of their machinery in both stowed and working positions.
  • Lower all machinery to the transport position when relocating. Work away from power-lines, not towards them.
  • Exclusion zones:  If the work you and your staff are planning has the potential to encroach into power-line exclusion zones, you should contact SA Power Networks for advice on doing the job safely.
  • Contact  SA Power Networks about placing identifiers on power-lines and power poles at your worksite and any further control measures.

Disclaimer

The Advice in this fact sheet is of a general nature and does not include any current or pending revisions that are available at Safe-Work-SA and SA Power Networks. This Web-blog is not an exhaustive list of all safety matters that need to be considered. Readers of this blog are urged to find the latest information at the following websites of Power Networks SA and Safe-Work SA.**

www.sapowernetworks.com.au/public/download.jsp?id=420

http://www.safework.sa.gov.au/show_page.jsp?id=2354

** For readers in Other States of Australia or Other countries: Please contact your local/state Electrical Utilities Provider and an Occupational Health and Safety Authority in your locality and/or industry.

We at Tested & True ... Do care about all aspects of Workplace electrical safety. Our trained Technicians understand workplace hazards and are ready assess your workplace equipment and remove hazards. On top of all this,we will repair plugs and leads and will even open up equipment to repair it on-site!..ensuring that your workplace is safe and that you stay compliant to Safe-Work_SA requirements.

Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC Pro-Logger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. Ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide January 2013