PULL THE PLUG… NOT THE LEAD!
Pulling the plug out of the socket by the lead will eventually expose the single wires which weakens its insulation and therefore increases electrocution risk. The Image below shows what happens to plugs pulled out by the leads
KEEP POWER LEADS AWAY FROM HEAT AND WATER.
Heat or water can damage the insulation and create a shock hazard.
POWER LEADS UNDER CARPETS ARE A FIRE HAZARD.
Don’t run electric cords under rugs, through doorways or anywhere they will get excessive wear.
INSPECT POWER LEADS AND POWER BOARDS
Worn, they can cause fires, short circuits or shocks. Check electrical cords and plugs and discard them if they are worn or damaged.
ELIMINATE MULTIPLE CONNECTIONS ON ONE POWER POINT
Plugging a number of cords into one outlet is a fire hazard. It usually indicates that your home wiring is outdated for your needs and that you should have more outlets wired in.
DO NOT CASCADE FROM ONE POWER BOARD TO ANOTHER OR OVERLOAD POWER BOARDS
Generally use Power Boards for Low current devices not Heaters, Kettles, and rotating machinery. Avoid cascading or connecting power boards together in chain arrangement as this may overload a 10 amp power wall socket and cause a fire or compromise the the electrical safety of the items attached to the power boards. Here below is an image of a burnt out power board which ran a 2400 Watt heater plus other electrical items. Note the burnt out socket.
DON’T USE EXTENSION CORDS AS PERMANENT WIRING.
An extension cord is a handy device to temporarily bring power to an area in your home that does not have an outlet. It was never designed to take the place of permanent wiring. Using extension cords as permanent wiring is an indication that your home wiring is not adequate and should be updated.
Here at Tested & True ~ test & tag, we can come to your work place and do an assessment of your Electrcal Hazards it is usually offered as an extra service and conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568
Tested and True uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one operation.On top this all our Technicians are Trained to National Standard UEENEEP008 by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standards ensuring that you get Quality Service at a competitive price.
Call Now Mobile 040 7605568
Visit us at
or our Newsletter http://testedtruenewsletter.blogspot.com/
Peter Hill Manager , Tested & True ~ test & tag Adelaide October 2013