What to look for when Buying a Smoke Alarm

 Which Type Of Smoke Detector I should buy?

Photoelectric or Ionisation?

The latest advancement In Smoke Detection Technology is the Photoelectric alarm they are widely regarded as being superior to ionisation alarms in most aspects. Not only do they respond faster than other alarms  and are less likely to cause annoying false alarms. Photoelectric alarms are particularly effective at detecting smouldering fires, which provides the earliest possible warning of a fire developing in an enclosed area.

If a smoke alarm has symbol a radioactive warning symbol, then it ionisation smoke alarm.

How many do I need to buy?

It is generally recommended that you should install smoke alarms in all rooms where people sleep and the hallways leading to sleeping areas.

In most states of Australia residents must have at least one working smoke alarm installed on each level of their home. This includes owner occupied, rental properties, relocatable homes, caravans and campervans or any other residential building where people sleep. Contact your Local Fire Authority

Are there approved smoke alarms?

The Australian Standard symbol on the packaging shows if the alarm is approved and safe.Smoke Alarms must meet the requirements of Australian Standard AS 3786.

Hard-wired or battery operated?

In some circumstances your alarms cannot be hard-wired, then it is recommended that these photoelectric alarms run on 10-year lithium batteries. Inbuilt 10-year lithium batteries last as long as the smoke alarm so you don’t need to worry about replacing them every year – you simply replace the entire smoke alarm unit once every 10 years.

Hard-wired smoke alarm

A hard-wired smoke alarm consists of a 240-volt smoke alarm connected to a home’s electrical system with a battery back-up power supply.

Battery operated smoke alarm

Most smoke alarms come with a battery but not all batteries are the same:

  • 10 year lithium batteries: These batteries are recommended and last as long as the smoke alarm.
  • Lead or alkaline batteries: Need to be replaced yearly.

Where can I buy them?

Available at most major supermarkets and hardware stores buy approved smoke alarms meeting Australian Standard AS 3786.

Strobe light and vibrating pad alarms

Strobe light and vibrating pad smoke alarms are available for people who are deaf or hard of hearing. For more information contact the Deaf Society in your local state of Australia

<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>

At Tested & True we can help you advise install and maintain smoke detectors for your workplace and residential requirements!

Call and ask for a quote. 040 7605568..At Tested and True …we come to you at a time convenient to you. We can do an assessment of your Smoke Alarm needs. We will provide a full service and report  for your Fire Safety Integrity. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au located in Lonsdale, South Australia

Peter Hill Manager Tested & True ~ test & tag Manager SA 0407605568 January 2017

National Coverage through the Safety Services Network (SA State Member)

SSN

Peter Hill Manager Tested & True ~ | test & tag | Lonsdale | South Australia |

 

Advertisements

Who is a competent Person to do Electrical Test & Tag?

 

Competency requirements for those carrying out inspection and testing of electrical equipment

Inspection and testing of electrical equipment must be carried out by a person who has acquired, through training, qualification or experience, the knowledge and skills to carry out the task (i.e. be a ‘competent person’). Inspection and testing of electrical equipment must be carried out by a competent person who has the relevant knowledge, skills and test instruments to carry out the relevant inspection and testing. The person carrying out any testing of electrical equipment should also be competent to interpret the test results of any equipment they use. For example, a person carrying out testing under AS/NZS 3760:2010 must be:

  • a licensed or registered electrician (whichever applies), or
  • in some jurisdictions, a licensed electrical inspector, or
  • a person who has successfully completed a structured training course and been deemed competent in the use of a pass-fail type portable appliance tester and the visual inspection of electrical equipment.

The training should be designed to ensure, so far as is reasonably practicable, that on completion successful participants:

  • can use the relevant test equipment safely and effectively
  • understand electrical risks and appreciate the role that inspection and testing plays in ensuring electrical safety
  • understand AS/NZS 3760:2010 and AS/NZS 3012:2010 (if testing equipment for construction or demolition sites)
  • understand the legal requirements relevant to the work.

Some kinds of electrical testing must only be carried out by a licensed electrician or electrical inspector under local electrical safety laws. For example, testing requiring the dismantling of electrical equipment should only be carried out by a licensed electrician.

Additional or different competencies may be required for more complex kinds of testing outside the scope of AS/NZS 3760:2010.

If in doubt, advice should be obtained from a person qualified and experienced in electrical equipment testing, for example an electrician, electrical contractor, electrical inspector, specialist testing provider or relevant regulator.

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

blog_logo

Tested & True ~ test & tag  Lonsdale We know how to test sensitive electrical equipment like that of a Surge Power Board and other Surge protected equipment…We specifically use the STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and up to date. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian Standards ensuring that you get Quality Service at a competitive price.

Article By Peter Hill… Tested & True ~ test & tag, Lonsdale, South Australia, Contact 0407605568 February 2016 www.testedandtrue.com.au

Home Fire Safety Electrical

In Australia hundreds of fires are caused by potential electrical hazards found in the home apart from fitting a smoke alarm would it not be best that you can reduce these hazards in the first place!

  • Replace or repair damaged or loose electrical cords.
  • Avoid running extension cords across doorways or under carpets.
  • In homes with small children, make sure your home has tamper-resistant (TR) receptacles.
  • Consider having additional circuits or outlets added by a qualified electrician so you do not have to use extension cords.
  • Follow the manufacturer’s instructions for plugging an appliance into a receptacle outlet.
  • Avoid overloading outlets. Plug only one high-wattage appliance into each receptacle outlet at a time.
  • If outlets or switches feel warm, frequent problems with blowing fuses or tripping circuits, or flickering or dimming lights, call a qualified electrician.
  • Place lamps on level surfaces, away from things that can burn and use bulbs that match the lamp’s recommended wattage.
  • Make sure your home has a Safety Switch or Separate RCD breakers for power outlets especially in the kitchen bathroom(s), laundry, basement, and outdoor areas.

We can check your Electrical safety and test your fire Alarms and safety Switches

Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform static testing class 1,2 & M RCD testing, Earth Leakage Detection, 3 phase run testing and logs results as you test. all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian Standards ensuring that you get Quality Service at a competitive price.

Call Now Mobile 040 7605568

Visit us at www.testedandtrue.com.au

or our Newsletter http://testedtruenewsletter.blogspot.com/ … September 2015