Uninterruptable Power Supplies (UPS) Buying Advice

Uninterruptable Power Supplies (UPS) Buying Tips

Summers here! … and Summer In Australia means Power Shortages and often leading to Blackouts (no power) or brownouts (low power ie low voltage and current) sometimes these are planned by the Electricity Suppliers to share the extra load during Hot Days… sometimes they occur unplanned because of overloaded or failed equipment either way Your expensive computer or in the case of a business your Server and the data in it could be rendered useless. UPS is the easiest way to protect your hardware and data. For a better and more thorough protection, you need a UPS. It isn’t intended to power you through a blackout though. For that, you would need a generator. Rather, a UPS will let you save your work and power down safely.

A UPS is designed to protect your computer you against such power fluctuations and more importantly, power up your computer even when there is no electricity. Here are a few tips that should help you make a more informed UPS purchasing decision.

  1. Power Outlets

When purchasing a UPS, make sure the power rating is right for your equipment. If you buy one that is rated too low, you might run out of juice before you can power down. Most UPS devices are designed to provide 10 minutes of power. When selecting a UPS, you need to look at the VA rating — or amps multiplied by voltage (240v). The amp rating should be listed on your computer. Add up the VA ratings of everything you will connect to the UPS, then purchase a UPS with a VA rating 20-25% higher. If you are a home PC user, look for a UPS with a 1000-1400 VA rating.

  1. Choose a good length Of Backup time

Don’t expect your UPS to keep your PC running all day. Most UPSes are engineered to provide you a backup time of around 10 to 20 minutes. What they essentially do is save your work when there is a power outage and avoid an abrupt shutdown that could mess up your computer settings. Choose the UPS that meets your backup time demands.

  1. Other features of a UPS

When you are buying a UPS, ask the vendor about more features than just power. This will help you in finding the UPS which has that one additional option that will help you in your buying decision. Of course, the best feature is Automatic Voltage Regulation (AVR) which isolates your PC from voltage fluctuations that lead to computer disturbances. A UPS with AVR conditions the incoming power before being fed to the PC’s Switch Mode Power Supply (SMPS). Most UPSes also automatically initiate a scheduled shutdown sequence when the power is lost, after saving your work, to prevent damage to the computer hardware.

  1. Warranty

Obtain a guarantee before buying a UPS. Undue delays in replacements can affect business. Some vendors offer onsite warranties, where they replace the batteries at your place. If you are planning to use the UPS at work, go for a longer warranty term.

  1. Battery replacement

The general rule is three years. But if you are experiencing low backup times more frequently, you could get the battery replaced immediately if it’s under warranty. If you are facing no problems, expect your battery to work for three years. Its advisable to buy replacement battery cartridges while you are buying the UPS. These cartridges will breathe new life into UPS systems suffering from expired or weak internal batteries.

  1. Power up

Contrary to the myth, its perfectly fine to leave the main switch on even when you are no longer working and the computer is shut down. However, its best to pair your UPS with a voltage stabilizer for additional safety.

  1. Software reporting

The software provided with the UPS is not always accurate with its reports. So don’t listen to it when it says your battery needs to be replaced even though you’ve never experienced low backup times. These faulty reports shouldn’t worry you because they may be trying to get you to purchase the company’s product more frequently (a common problem with print cartridges.) The software is good at its essential function of shutting down the PC properly and saving your work, but you may be the best option to determine whether its time to change the battery.

  1. Tips and tricks

Do not overload the UPS by, for example, connecting external devices like the printer, scanner and the fax machine. NEVER plug a printer into the battery backup system. To optimize the charge of your batteries, you should discharge them completely at least once a month. And lastly, make sure the UPS is properly grounded all the time to prevent any electrical disasters.

  1. Shop around compare specifications against Price..

Standby UPSs are available in the range of 300VA to 500VA for office use, and up to 2KVA to 3KVA for workstations and large servers. Inexpensive standby UPSs ranging in price from $50 to $125 are used by millions of users of personal computers all over the world. Some of them include brands like Belkin, American Power Conversion (APC), Cyber Power, Data Shield, EFI, NCR, SAFE, Pacific Power, Sola and UP Sonic.

Conclusion

Bsically, there are two kinds of UPS systems. The Standby Power System (SPS) and Online UPS System. If you are a home user, go for the relatively cheaper SPS. The price of an online UPS is three to five times that of a standby UPS with the same power rating. For servers, buy an online UPS (online means outgoing power is always drawn from the battery). Expect to pay between $150 and $1,000 for an online UPS. The higher the VA rating, the more you’ll pay. You might also want to consider buying one with advanced-battery features. These features include intelligent-battery management, battery-replacement indicator, and hot-swappable user-replaceable batteries.

Remember

An UPS isn’t intended to power you through a blackout.. For that, you would need a generator. However an UPS is a cost effective way to let you save your work and power down safely.

<<<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>

Of course the best way is to ensure that your computer and UPS systems are not hazardous in the first place by ensuring that no dangerous electrical currents are present on the external parts of the appliance or hidden faults inside. We at Tested & True ~ test & tag come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommendations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568

Tested & True ~ test & tag  Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian Standards ensuring that you get Quality Service at a competitive price.

Call Now Mobile 040 7605568

Visit us at

www.testedandtrue.com.au

or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Lonsdale SA November 2015

Understanding the Danger of Electrical shock

The 2  Major hazards attributed to electrical equipment and wiring are electrical shock and fire. Electrical shock occurs when the body becomes part of the electric circuit, either when a part of your body comes in contact with both of the active component (Active/Neutral)wires of an electrical circuit, or one wire of an energized circuit and the Earth wire (or grounded wire)…., or a foreign conductive object that has become energized by contact with an electrical conductor.

The severity and effects of an electrical shock depend on a number of factors, such as the pathway through the body, the amount of current, the length of time of the exposure, and whether the skin is wet or dry (ie sweat). Water is a great conductor of electricity, allowing current to flow more easily in wet conditions and through wet skin.

240V can kill!The effect of the shock may range from a slight tingle to severe burns to cardiac arrest. The chart below shows the general relationship between the degree of injury and amount of current for a 50-cycle hand-to-foot path of one second’s duration of shock. While reading this chart, keep in mind that most electrical circuits can provide, under normal conditions, up to 20,000 milliamperes of current flow. So only a very small percentage of current leaking to earth can cause harm if touched by your body… as little as 30 milliamperes of current can KILL !!!

Current
Reaction
1 Milliampere Perception level
1-5 Milliamperes Slight shock felt; not painful but disturbing
6-29 Milliamperes Painful shock; “let-go” range
30-150 Milliamperes Extreme pain, respiratory arrest
151-4,300 Milliamperes Ventricular fibrillation
4,300+ Milliamperes Cardiac arrest, severe burns & even death

In addition to the electrical shock hazards, sparks from electrical equipment can serve as an ignition source for flammable or explosive vapors.

Even loss of electrical power can result in extremely hazardous situations. Flammable or toxic vapors may be released as a chemical warms when a refrigerator or freezer fails. Fume hoods may cease to operate, allowing vapors to be released into the work area.  So take care with your electrical equipment and consider all contingencies in the operation of that equipment.

<<<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>

Of course the best way is to ensure that your appliances are not hazardous in the first place by ensuring that not dangerous electrical currents are present on the external parts of the appliance. We at Tested & True ~ test & tag come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommendations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568

Tested & True ~ test & tag  Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian Standards ensuring that you get Quality Service at a competitive price.

Call Now Mobile 040 7605568

Visit us at

www.testedandtrue.com.au

or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Lonsdale SA October 2015

Electrical Risk in the Workplace

Electrocution incidents can be fatal, since the year 2000 25-30 people die from Electrocution in Australia (http://www.erac.gov.au/ ) 90 percent of these deaths involve non Electrical workers! Many more are seriously injured while non-fatal shocks can result in serious and permanent burn injuries to skin, internal tissues and damage to the heart depending on the length and severity of the shock.

Electric shocks from faulty electrical equipment may also lead to related injuries, including falls from ladders, scaffolding or other elevated work platforms. Other injuries or illnesses may include muscle spasms, palpitations, nausea, vomiting, collapse and unconsciousness. Those working with electricity may not be the only ones at risk. Poor electrical installation and faulty electrical appliances can lead to electric shock to others at or near the workplace.

How can I avoid electrical hazards?

Dependant on the context and conditions, but may include for example:
  • Ensure only appropriately licensed or registered electricians carry out electrical work
  • Switch off electricity where possible before working on equipment
  • Ensure electrical equipment is in good working order (testing and tagging)
  • Use battery operated tools rather than mains power tools where possible
  • Remove damaged, unsafe electrical equipment or cords from the workplace
  • Ensure tag out and isolation procedures are in place and used
  • Use residual current devices (or safety switches) with portable equipment (as per the WHS Regulations)
  • Don’t overload power sockets. Use power boards not double adaptors
  • Meet electrical safety standards

The best way is to meet electrical safety standards is to have your appliances tested and tagged…

At Tested and True …We test Safety Switches as well as other electrical testing services. We come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 0407605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standard AS/NZS 3760:2010 ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au  or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide August 2015

My Safety Switch keeps tripping… What do I do next?

Electrical Safety Switch Tripping possibilities

Electrical Safety Switches  are RCDs ( Residual Current Devices)  that remove the supply to an electrical circuit when the circuit under protection has detected a leakage to earth. The RCD/Safety Switch responds in mere mili -seconds; avoiding an unsafe condition and thereby potentially preventing electrocution or Fire hazard.

Possible Causes Of Safety Switch/RCD Tripping

Faulty appliance – unplug all electrical appliances, does the RCD reset OK? If the RCD resets OK plug the appliances back in one at a time. Reset the RCD as you plug each appliance back in to find the faulty appliance.

Items with motors or pumps starting – many items with motors or pumps, for instance showers and pond pumps, cause momentary electrical spikes that are big enough to trip RCDs. Seek advice from a qualified electrician.

Older washing machines – aging washing machine heating elements can cause momentary electrical spikes that are big enough to trip RCDs.

Certain wash cycle phases – some cycles of the washing machine, for instance the spin cycle, can cause momentary electrical spikes that are big enough to trip RCDs.

Certain dishwasher cycles – some parts of the dishwasher cycle draw a lot of current, a faulty component, for instance the motor, can trip an RCD.

Overloading a washing machine – too many items in a washing machine can cause certain wash cycles, for instance the spin cycle, to trip an RCD.

Fridges and freezers cooling – the fridge or freezer cooling motor starting.

Turning an heating element on after a long time of being off – moisture in heating elements can trip an RCD, for instance in a sun bed or electric fire. Try resetting the RCD a few times so that the heating element can cause the moisture to evaporate.

Moisture in outside electrical distribution boxes – remove the supply and dry the distribution box. Check the weather seals have not perished.

Moisture in outside electrical sockets – remove the supply and dry the electrical socket. Check the weather seals have not perished.

De-frost timer on a fridge or freezer – a faulty defrost element on a fridge or freezer can cause ‘nuisance’ RCD tripping.

Water heating elements – faulty water heating elements can cause nuisance RCD trips when thethermostat tells them to heat the water.

Moisture in wiring – moisture in the electrical wiring is a common cause of RCD trips. Have you just emptied a bath? Taken a shower? Is it raining – rain can get into the electrical wiring under the floors or in the loft.

As you may have found this list contains certain  conditions that may give clue to an RCD tripping. In most cases this concerns appliances or situations that involve at least one or a combination of  three conditions 1) Moisture leaking electricity to earth in the appliance or premises wiring. 2) A heating element that is either faulty or drawing sudden electrical surges. 3) An appliance with an electric motor that is either faulty or drawing sudden electrical surges.

If you have trouble sourcing constant or intermittent RCD/Safety Switch Tripping then Contact us and we can send a Qualified Electrician around to check it they can source and fix it on the spot.

<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>

At Tested and True …We test Safety Switches as well as other electrical testing services. We come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standard AS/NZS 3760:2010 ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide February 2015

Why does my Safety Switch keep tripping?

Electrical Safety Switch Tripping possibilities

Electrical Safety Switches  are RCDs ( Residual Current Devices)  that remove the supply to an electrical circuit when the circuit under protection has detected a leakage to earth. The RCD/Safety Switch responds in mere mili -seconds; avoiding an unsafe condition and thereby potentially preventing electrocution or Fire hazard.

Possible Causes Of Safety Switch/RCD Tripping

Faulty appliance – unplug all electrical appliances, does the RCD reset OK? If the RCD resets OK plug the appliances back in one at a time. Reset the RCD as you plug each appliance back in to find the faulty appliance.

Items with motors or pumps starting – many items with motors or pumps, for instance showers and pond pumps, cause momentary electrical spikes that are big enough to trip RCDs. Seek advice from a qualified electrician.

Older washing machines – aging washing machine heating elements can cause momentary electrical spikes that are big enough to trip RCDs.

Certain wash cycle phases – some cycles of the washing machine, for instance the spin cycle, can cause momentary electrical spikes that are big enough to trip RCDs.

Certain dishwasher cycles – some parts of the dishwasher cycle draw a lot of current, a faulty component, for instance the motor, can trip an RCD.

Overloading a washing machine – too many items in a washing machine can cause certain wash cycles, for instance the spin cycle, to trip an RCD.

Fridges and freezers cooling – the fridge or freezer cooling motor starting.

Turning an heating element on after a long time of being off – moisture in heating elements can trip an RCD, for instance in a sun bed or electric fire. Try resetting the RCD a few times so that the heating element can cause the moisture to evaporate.

Moisture in outside electrical distribution boxes – remove the supply and dry the distribution box. Check the weather seals have not perished.

Moisture in outside electrical sockets – remove the supply and dry the electrical socket. Check the weather seals have not perished.

De-frost timer on a fridge or freezer – a faulty defrost element on a fridge or freezer can cause ‘nuisance’ RCD tripping.

Water heating elements – faulty water heating elements can cause nuisance RCD trips when thethermostat tells them to heat the water.

Moisture in wiring – moisture in the electrical wiring is a common cause of RCD trips. Have you just emptied a bath? Taken a shower? Is it raining – rain can get into the electrical wiring under the floors or in the loft.

As you may have found this list contains certain  conditions that may give clue to an RCD tripping. In most cases this concerns appliances or situations that involve at least one or a combination of  three conditions 1) Moisture leaking electricity to earth in the appliance or premises wiring. 2) A heating element that is either faulty or drawing sudden electrical surges. 3) An appliance with an electric motor that is either faulty or drawing sudden electrical surges.

If you have trouble sourcing constant or intermittent RCD/Safety Switch Tripping then Contact us and we can send a Qualified Electrician around to check it they can source and fix it on the spot.

<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>

At Tested and True …We test Safety Switches as well as other electrical testing services. We come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standard AS/NZS 3760:2010 ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide January 2014

Buyers Guide to Surge Protected Power Boards

How do surge protected power boards work ?
At first glance a surge protected power board operates like any other Power Board. It shows its ability at that moment when too much voltage gets passed along the transmission line , the surge protected board lets only a ‘safe’ amount through to the connected equipment. The rest it channels into the electrical outlet’s ‘earth’ and safely dissipated into the ground.
When a surge occurs at a certain level above normal voltage, a component built into the surge protected power board becomes conductive and starts to carry the excess electric current back down through the ground wire, so the damaging high voltage doesn’t reach connected equipment. Once the surge ends, that protective component resumes its ‘dormant’ stage of being non-conductive. It’s a bit like an electrical version of a pressure valve.
Australian domestic wiring is designed for a standard voltage of 230–240 volts. If the voltage goes too far above that, it can damage electronic equipment, which usually has many sensitive components. If excess voltage lasts for a very brief time (1–2 nanoseconds) it’s called a spike. If it lasts longer it’s called a surge. Even though a spike or surge can be so brief their duration is measured in nanoseconds, they can still cause damage to sensitive components. It is vitally important to protect sensitive business equipment, Computers, printers, photocopiers etc these items of equipment are sensitive to Surges in voltage.
Surge_protection_board
So what sort of a Surge Protected Board should you Buy ? Here are the specifications you should consider…Energy absorption/dissipation – This rating, given in joules, tells you how much energy the surge protector can absorb before it fails. A higher number indicates greater protection. Look for a protector that is at least rated at 200 to 400 joules. For better protection, look for a rating of 600 joules or more.
Response time – Surge protectors don’t kick in immediately; there is a very slight delay as they respond to the power surge. A longer response time tells you that your computer (or other equipment) will be exposed to the surge for a greater amount of time. Look for a surge protector that responds in less than Ten nanoseconds.
It is best to look for a Surge protected board with an indicator light that tells you if the protection components are functioning. Eventually the protection component will burn out after continual power surges, but the board will still function as a power connection. Without an indicator light, you have no way of knowing if your protector is still functioning properly.
Other important features may include ?
Building wiring status indicator: Detects potentially dangerous wiring problems in the wall outlet.
Circuit breaker: Protects the surge board from overload by connected devices drawing too much current.
EMI noise filtration: This reduces or eliminates line noise (electrical interference).
Other connections: Surge protected sockets for coaxial cable, modem or Ethernet network, all of which can also conduct high voltage that can damage connected devices.
Outlet spacing: Allows more room for one or more devices that use a transformer block.
Sockets: Check the number of mains power sockets available, usually from four to eight.

<<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>

At Tested and True …we come to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standard AS/NZS 3760:2010 ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager Tested & True ~ test & tag Manager SA 0407605568

Take Care of your Workplace Appliances and Cords

PULL THE PLUG… NOT THE LEAD!

Pulling the plug out of the socket by the lead will eventually expose the single wires which weakens its insulation and therefore increases electrocution risk. The Image below shows what happens to plugs pulled out by the leads
Exposed wires from pulling on lead

KEEP POWER LEADS AWAY FROM HEAT AND WATER.

Heat or water can damage the insulation and create a shock hazard.

POWER LEADS UNDER CARPETS ARE A FIRE HAZARD.

Don’t run electric cords under rugs, through doorways or anywhere they will get excessive wear.

INSPECT POWER LEADS AND POWER BOARDS

Worn, they can cause fires, short circuits or shocks. Check electrical cords and plugs and discard them if they are worn or damaged.

ELIMINATE MULTIPLE CONNECTIONS ON ONE POWER POINT

Plugging a number of cords into one outlet is a fire hazard. It usually indicates that your home wiring is outdated for your needs and that you should have more outlets wired in.

DO NOT CASCADE FROM ONE POWER BOARD TO ANOTHER OR OVERLOAD POWER BOARDS

Generally use Power Boards for Low current devices not Heaters, Kettles, and rotating machinery. Avoid cascading or connecting power boards together in chain arrangement as this may overload a 10 amp power wall socket and cause a fire or compromise the the electrical safety of the items attached to the power boards. Here below is an image of a burnt out power board which ran a 2400 Watt heater plus other electrical items. Note the burnt out socket.
Burnt out Neutral connection _ Personal and Fire Hazard

DON’T USE EXTENSION CORDS AS PERMANENT WIRING.

An extension cord is a handy device to temporarily bring power to an area in your home that does not have an outlet. It was never designed to take the place of permanent wiring. Using extension cords as permanent wiring is an indication that your home wiring is not adequate and should be updated.

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<0>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here at Tested & True ~ test & tag, we can come to your work place and do an assessment of your Electrcal Hazards it is usually offered as an extra service and conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568

Tested and True uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one operation.On top this all our Technicians are Trained to National Standard UEENEEP008 by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standards ensuring that you get Quality Service at a competitive price.

Call Now Mobile 040 7605568

Visit us at

www.testedandtrue.com.au

or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide October 2013

The Safety Switch turns off, so what do you do?

A simple step by step guide to fault finding a tripped Safety Switch.

Note: Some types of appliances may cause incidental or nuisance tripping of your Safety Switch or RCD device. Typically Water Heaters, Electric Jugs and Kettles, Steam Irons, Dishwashers, washing Machines, Swimming Pool Equipment, Auto Defrost Refrigerators and Freezers.

Most Important: If your Safety Switch has turned off, it has done so for a reason. It has detected a leak of some electricity. This may be through a faulty appliance or it may be a fault in the house wiring. These instructions will help you find that leak.  

  1. First try to turn the Safety Switch on.[Marked Residual Current Device]
  2. If it stays on then the fault was intermittent or transient and we can do nothing at this stage. Refer to Note above.
  3. Think of what you were using at the time.
  4.  If the Residual Current Device trips off again, got to point 5.
  5. Turn on the Residual Current Device.
  6. If it won’t stay on then you will have to unplug all appliances!
  7. This includes any outside power points or power to outbuildings.
  8. At this point the Residual Current Device should stay on. [If not you will need to call an Electrician.]
  9. If the Residual Current Device stays on then turn the Circuit Breakers on one at a time.
  10. When you come to the leaking circuit, the Residual Current Device will turn off.
  11. Unplug all appliances that are plugged in to power points that do not work.
  12. Turn the Residual Current Device on. If it won’t stay on then you will have to call an Electrician.
  13. If it stays on, then one of the appliances you have unplugged is faulty. Plug the items in, one at a time until you find the faulty one.

Remember Do not fix any Electrical device yourself, give the device to a suitably qualified electrical repair workshop or if under warranty consult with the manufacturer for the possibility of repair under those warranty conditions.

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Tested & True ~ test & tag  Adelaide uses the very latest in Portable Appliance Testing…The STC Pro-Logger 2 it can perform static testing class 1,2 & M ,RCD testing, Earth Leakage Detection, 3 phase run testing and logs results as you test. all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australian Standards ensuring that you get Quality Service at a competitive price.

Call Now Mobile 040 7605568

Visit us at

www.testedandtrue.com.au

or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide September 2013

Workplace Power Tool Safety Update:

Workplace Power Tool Safety Tips

Introduction:

Power Tools are time saving convenient devices that assist us in building and maintaining our World. However it also contributes to large amount of injuries recorded in Australia every year. Many of these injuries are often easily avoidable and attributed to carelessness, a lack of proper tool maintenance or simply not reading the operating instructions.

Power Tool safety 101

  •          Wear safety gear

Always wear the appropriate safety gear, particularly safety eye wear. Flying shards and debris create unpredictable trajectories and a sudden occurrence can not only cause damage to your eyes but force you to loose control of the powered tool you’re operating.

In addition to eye wear, workplace noise is also often overlooked. However the cumulative time of exposure to above normal decibel levels in the workplace can do irreversible damage to your hearing.

Other safety gear such as gloves and appropriate clothing/ safety footwear are just as important, and should be part of formal personnel safety plans.

  •          Read the operating instructions

Being unfamiliar with the safe operation of the power is often the cause of power tool injuries. Before using anew power tool ensure you read the operation, safety and maintenance instructions of the particular tool. The key here is to familiarize both yourself and your team with new equipment when it is introduced to the fleet or job. In particular, built in safety devices and kill switches should be highlighted. Remember to also use a RCD power breaker/power board when working with high powered tools.

  •          Electrical Safety and Power Tool operation

When workers use portable power tools and electrical leads that are electrically faulty or damaged they may suffer electrical shock, which could result in death, heart problems, internal organ damage or burns. To reduce risk of injury or death, electrical leads and power tools should be visually inspected prior to use, and avoided if equipment appears to have been modified or damaged. Tools should only be plugged into socket outlets that are protected by a residual current device (RCD) or a portable RCD is used.

Electrical hazard found on Site

Cut Lead Exposed wires found on Circular Saw at Warehouse

Workers should ensure power circuits are protected by the appropriate rated fuse or circuit breaker to prevent overloading and potential overheating. Electrical leads should be arranged so they do not run across the floor or ground, through doorways and over sharp edges. Where the lead arrangement is dangerous, lead stands or insulated cable hangers should be used to keep leads off the ground. Leads and tools should never be used in damp conditions unless they are specially designed for use in those conditions. Ensure your Tools are Tested and Tagged regularly to pick up electrical faults and potential hazards.

  •          Report all accidents

It’s important to report all accidents and injuries in the workplace. This not only creates a culture of continuous learning, but also helps to future proof against lengthy compensation claims.

In South Australia, It is a legal obligation to notify Safe-Work SA of any work-related injury that requires treatment as an inpatient in a hospital immediately after a workplace  injury (disregarding any time taken for emergency treatment or to get the person to hospital).If you are reporting work-related injuries or incidents to Safe-Work SA the 24 hour Emergency, Dial 1800 777 209.

<<<<<<<<<<<<<<<<<<<<<<<<<< @ >>>>>>>>>>>>>>>>>>>>>>>>>

Tested & True ~ test & tag comes to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standards ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide May 2013

Be Safe This Winter with these Electrical Safety Tips

WINTER IS NEARLY HERE!

Time to pull on the Uggies and put those warm Trackie Dacks on (Tracksuit/Sweat suit) and get out you favorite electrical heating appliance… aah Cosy, Warm …and Safe !?! (well you’d hope)

Statistics show that sales of electrical appliances increase during May. The first winter like chill and we are down at the shops looking for the easiest  and sometimes the cheapest way to warm ourselves… Then at that point; it is a Good time to review safety tips on buying and using electrical appliances.

Large electrical appliances are a major cause of electrocutions. Make sure appliances are purchased
from reputable dealers and have been certified by Australian standards.  The introduction of cheap/counterfeit electrical appliances products into the marketplace is on the rise. Appliances must comply with the minimum safety requirements contained in Australian Standard AS/NZS 3820:1998. Here below is a tick mark to look for on all approved equipment.

For portable heaters used frequently  during colder months. Following manufacturers’
instructions is the first step in avoiding electrical hazards.

Power boards and extension cords do not provide more power, but increase access to electrical outlets. As we try to meet 21st century power needs in homes and buildings with too few outlets to meet needs, our use of power boards and extension cords increases. Use of  improperly rated extension cords and power boards is among the causes of many  electrical fires each year.

APPLIANCES, ELECTRONICS AND  LIGHTING

If an appliance repeatedly blows a fuse, trips Safety Switch / breaker or has given you an electrical shock, immediately unplug it and have it repaired or replaced. Look for cracks or damage in wiring, plugs and connectors.

Use surge protectors to protect expensive electronics.

Check the wattage of bulbs in lamps and light fixtures to make sure they are the correct wattage. Replace bulbs that have a higher than recommended wattage;
they are a fire hazard. Make sure bulbs are screwed in securely because loose bulbs can overheat.

Halogen lamps operate at high temperatures. Make sure halogen bulbs do not come into contact with curtains, clothing or other flammable materials.

ELECTRIC BLANKETS and SAFETY

Electric blankets should be rolled when stored away. Folding an electric blanket can damage element wires within the blanket.
When using a blanket for the first time after storage, lay it flat on the bed and check for hot spots as it heats up. Only add sheets once you are sure the blanket will operate safely at a maximum temperature.
Electric blankets that are not properly maintained can cause fires.
Avoid using double adaptors or power boards wherever possible.
Older electric blankets might be damaged and may not have the safety features of modern blankets, so consider replacing them.

To avoid disaster, children need to be aware of  improper uses of electric items and the consequences of unsafe behavior. Practicing safe electrical habits early in life will be valuable through out adulthood.

<<<<<<<<<<<<<<<<<<<<<<<<<< @ >>>>>>>>>>>>>>>>>>>>>>>>>

Tested & True ~ test & tag comes to your work place at a time convenient to you. We can do an assessment of your Electrical Hazards it can be conducted at the same time as we test and tag your Electrical Equipment. We provide a Full Report with recommedations to clear up current Hazards and how to prevent future risks. Call and ask for a quote. 040 7605568 Tested & True ~ test & tag Adelaide uses the very latest in Portable Appliance Testing…The STC ProLogger 2 it can perform RCD testing, Earth Leakage Detection and Run Testing all in one neat piece of equipment. On top this all our Technicians are Trained to National Standard UEENEEP008 in test & tag operations by Intertag in Sydney NSW, all our Equipment is in good repair and in Calibration. Most of all we pride ourselves on our Knowledge of OH&S legislation and the current Australiand Standards ensuring that you get Quality Service at a competitive price. Call Now Mobile 040 7605568

Visit us at http://www.testedandtrue.com.au or our Newsletter http://testedtruenewsletter.blogspot.com/

Peter Hill Manager , Tested & True ~ test & tag Adelaide May 2013